Gebietsschemafehler bei Apt-get Install?

Mit apt-get install können keine neuen Pakete oder Software installiert werden unter Ubuntu 14.04,
Fehlerdetails

installArchives() failed: perl: warning: Setting locale failed. 
perl: warning: Please check that your locale settings: 
    LANGUAGE = (unset), 
    LC_ALL = (unset), 
    LANG = "en_IN.ISO8859-1" 
    are supported and installed on your system. 
perl: warning: Falling back to the standard locale ("C"). 
locale: Cannot set LC_CTYPE to default locale: No such file or directory 
locale: Cannot set LC_MESSAGES to default locale: No such file or directory 
locale: Cannot set LC_ALL to default locale: No such file or directory 
perl: warning: Setting locale failed. 
perl: warning: Please check that your locale settings: 
    LANGUAGE = (unset), 
    LC_ALL = (unset), 
    LANG = "en_IN.ISO8859-1" 
    are supported and installed on your system. 
perl: warning: Falling back to the standard locale ("C"). 
locale: Cannot set LC_CTYPE to default locale: No such file or directory 
locale: Cannot set LC_MESSAGES to default locale: No such file or directory 
locale: Cannot set LC_ALL to default locale: No such file or directory 
perl: warning: Setting locale failed. 
perl: warning: Please check that your locale settings: 
    LANGUAGE = (unset), 
    LC_ALL = (unset), 
    LANG = "en_IN.ISO8859-1" 
    are supported and installed on your system. 
perl: warning: Falling back to the standard locale ("C"). 
locale: Cannot set LC_CTYPE to default locale: No such file or directory 
locale: Cannot set LC_MESSAGES to default locale: No such file or directory 
locale: Cannot set LC_ALL to default locale: No such file or directory 
(Reading database ... 
(Reading database ... 5% 
(Reading database ... 10% 
(Reading database ... 15% 
(Reading database ... 20% 
(Reading database ... 25% 
(Reading database ... 30% 
(Reading database ... 35% 
(Reading database ... 40% 
(Reading database ... 45% 
(Reading database ... 50% 
(Reading database ... 55% 
(Reading database ... 60% 
(Reading database ... 65% 
(Reading database ... 70% 
(Reading database ... 75% 
(Reading database ... 80% 
(Reading database ... 85% 
(Reading database ... 90% 
(Reading database ... 95% 
(Reading database ... 100% 
(Reading database ... 337820 files and directories currently installed.) 
Preparing to unpack .../python-colorama_0.2.5-0.1ubuntu2_all.deb ... 
Unpacking python-colorama (0.2.5-0.1ubuntu2) ... 
dpkg: error processing archive /var/cache/apt/archives/python-colorama_0.2.5-0.1ubuntu2_all.deb (--unpack): 
 trying to overwrite '/usr/lib/python2.7/dist-packages/colorama/ansi.py', which is also in package python-batteryonboardservices 0.1-1 
Preparing to unpack .../python-setuptools_3.3-1ubuntu2_all.deb ... 
Unpacking python-setuptools (3.3-1ubuntu2) ... 
dpkg: error processing archive /var/cache/apt/archives/python-setuptools_3.3-1ubuntu2_all.deb (--unpack): 
 trying to overwrite '/usr/lib/python2.7/dist-packages/setuptools/dist.py', which is also in package python-batteryonboardservices 0.1-1 
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) 
Errors were encountered while processing: 
 /var/cache/apt/archives/python-colorama_0.2.5-0.1ubuntu2_all.deb 
 /var/cache/apt/archives/python-setuptools_3.3-1ubuntu2_all.deb 
Error in function: 
dpkg: dependency problems prevent configuration of python-pip: 
 python-pip depends on python-colorama; however: 
  Package python-colorama is not installed. 
 python-pip depends on python-setuptools (>= 0.6c1); however: 
  Package python-setuptools is not installed. 

dpkg: error processing package python-pip (--configure): 
 dependency problems - leaving unconfigured 

Akzeptierte Antwort:

Um Gebietsschemas zu korrigieren, überprüfen Sie Ihre Sprachunterstützungseinstellungen – Englisch (Indien) sollte installiert sein. Wenn nicht, installieren Sie es. Führen Sie dann Folgendes aus:

sudo locale-gen en_IN.UTF-8

Wenn das Gebietsschema dadurch nicht generiert wird, können Sie

verwenden

sudo dpkg-reconfigure locales

und wählen Sie en_IN UTF-8 aus der riesigen Liste, um dasselbe zu tun

Verwandte Themen:Ist es möglich, in Ubuntu von einer 32-Bit- auf eine 64-Bit-Installation zu „upgraden“?

Überprüfen Sie nach dem Generieren des gewünschten Gebietsschemas die Ausgabe von locale . Sie möchten sehen:

LANG=en_IN.UTF-8
LANGUAGE=en_IN:en
LC_CTYPE="en_IN.UTF-8"
LC_NUMERIC=en_IN.UTF-8
LC_TIME=en_IN.UTF-8
LC_COLLATE="en_IN.UTF-8"
LC_MONETARY=en_IN.UTF-8
LC_MESSAGES="en_IN.UTF-8"
LC_PAPER=en_IN.UTF-8
LC_NAME=en_IN.UTF-8
LC_ADDRESS=en_IN.UTF-8
LC_TELEPHONE=en_IN.UTF-8
LC_MEASUREMENT=en_IN.UTF-8
LC_IDENTIFICATION=en_IN.UTF-8
LC_ALL=

Wenn en_IN.UTF-8 nicht angezeigt wird für alles, dann tun Sie dies:

sudo update-locale LANG="en_IN.UTF-8" LANGUAGE=en_IN:en

und überprüfen Sie locale wieder. Wenn der LC Variablen immer noch falsch sind, dann tue:

nano ~/.pam_environment

und bearbeiten Sie es so, dass es so aussieht:

LANGUAGE=en_IN:en
LANG=en_IN.UTF-8
LC_NUMERIC=en_IN.UTF-8
LC_TIME=en_IN.UTF-8
LC_MONETARY=en_IN.UTF-8
LC_PAPER=en_IN.UTF-8
LC_NAME=en_IN.UTF-8
LC_ADDRESS=en_IN.UTF-8
LC_TELEPHONE=en_IN.UTF-8
LC_MEASUREMENT=en_IN.UTF-8
LC_IDENTIFICATION=en_IN.UTF-8
PAPERSIZE=a4

(belassen Sie die papersize allein – ich bin mir nicht sicher, was es für dich sein soll!)

Speichern, beenden, eingeben:source ~/.pam_environment und jetzt Ihr locale ist behoben.